Comprehensive analysis of molecular sieve oxygen generator

Molecular sieve oxygen generator generally adopts the pressure adsorption atmospheric pressure desorption (HP) method, and the same cycle process is carried out by two adsorption towers respectively, so as to realize continuous gas supply. The whole system is automatically controlled by a single-chip microcomputer.

2023-04-19

Insulating glass 3A molecular sieve

"Insulating glass 3A molecular sieve" may sound unfamiliar at first, but when it comes to glass, everyone is very familiar with it. Glass, which the ancients called it flowing glass or glaze, is a colored and translucent mineral. Yuan Zhen, a poet in the Tang Dynasty, praised it like this: "The color is the same as the ice, and there is nothing to separate the dust." But it seems that there is nothing, but it can separate the fibers and dust.

2023-04-19

Replacement requirements for natural gas molecular sieve desiccant

Open the bottom flange of the adsorption dryer equipment, discharge the adsorbent in the adsorption tank, and then use a vacuum cleaner to clean the bottom dust and debris. 2: Check whether the wire mesh under the sieve plate at the bottom of the adsorption tank is damaged. If it is damaged, you need to replace the stainless steel 40 mesh or 60 mesh wire mesh. It is best to use a double-layer stainless steel wire mesh. 3: After the bottom flange is installed, test the sealing condition for air leakage. 4: Open the top flange, pour the molecular sieve from the top flange into the adsorption tank,

2023-04-19

Adsorption principle of a molecular sieve

The difference between activated alumina and molecular sieve products Molecular sieve: natural or synthetic chemicals with network structure. Molecular sieves are crystalline silicates or aluminosilicates that link silicon-oxygen tetrahedrons or aluminum-oxygen tetrahedra via oxygen bridges to form a system of channels and cavities with molecular dimensions typically 0.3 to 2.0 nm, thereby having sieves.

2023-04-19